Notification, Setup mail tx, Sender subject – Brother MFC-9420CN User Manual
Page 30: Size limit, Notification -11, Setup mail tx -11, Sender subject -11 size limit -11
Front Panel Setup
3 - 11
3
3
Press Menu/Set.
4
Press Stop/Exit.
Notification
The notification feature allows a confirmation of receipt message to be transmitted to the sending station
When the I-Fax has been received.
This feature only works on I-Fax machines that support the “MDN” specification.
1
Press Menu/Set,
6
,
3
,
5
.
2
Press
▲
or
▼
to select
On
or
MDN
or
Off
.
3
Press Menu/Set.
4
Press Stop/Exit.
Setup Mail TX
This menu has three selections Sender Subject, Size Limit and Notification.
Sender Subject
This field displays the subject that is attached to the Internet Fax data being sent from the Brother machine
to a PC (default is “
Internet Fax Job
”).
1
Press Menu/Set,
6
,
4
,
1
.
2
Select
1
to change the Sender Subject—OR—
2
to exit.
3
Enter the subject information.
4
Press Menu/Set.
5
Press Stop/Exit.
Size Limit
Some E-mail servers do not allow you to send large E-mail documents. (the System Administrator will often
place a limit on the maximum E-mail size). With this function enabled, the machine will display
Out of
Memory
when trying to send E-mail documents over 1Mbyte in size. The document will not be sent and an
error report will be printed. The document you are sending should be separated into smaller documents that
will be accepted by the mail server. (For your information, a 42 page document based on the ITU-T Test
Chart#1 test chart is approximately 1Mbyte in size).
1
Press Menu/Set,
6
,
4
,
2
.