Brother MFC-9420CN - Manual (Page 32)

Front Panel Setup
3 - 13
3
Relay Domain
You can register the Domain Names (Max.10) that are allowed to request a Relay Broadcast.
1
Press Menu/Set, 6 , 5 , 2 .
2
Press
▲
or
▼
to select the Relay Domain (01 - 10).
3
Press Menu/Set.
4
Enter the Relay Domain name for the Domain that is being allowed to request a Relay Broadcast.
5
Press Menu/Set.
6
Press Stop/Exit.
Relay Report
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts. When the machine is used with the Brother Network PC Fax software the machine is also acting
as a Relay Station for fax transmissions from the network. This means that a Relay Report can also be printed
for confirmation of sent network faxes. (For US / Canada only)
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: in order to use this function, you must assign the relay domain in the "Trusted Domains" section
of the Relay function settings.
1
Press Menu/Set, 6 , 5 , 3 .
2
Press
▲
or
▼
to select On or Off .
3
Press Menu/Set.
4
Press Stop/Exit.