Brother MFC-9450CDN - Manual (Page 41)

General setup
25
3
Automatic daylight
savings time
3
You can set the machine to change
automatically for Daylight Savings Time. It
will set itself forward one hour in the Spring,
and back one hour in the Fall.
a
Press Menu 1, 5.
General Setup
5.Auto Daylight
b
Press a or b to choose On (or Off).
Press OK.
c
Press Stop/Exit.
Ecology features
3
Toner save
3
You can save toner using this feature. When
you set toner save to On, print appears
lighter. The default setting is Off.
a
Press Menu, 1, 6, 1.
Ecology
1.Toner Save
b
Press a or b to choose On (or Off).
Press OK.
c
Press Stop/Exit.
Note
We do not recommend Toner Save for
printing Photo or Gray Scale images.
Sleep time
3
Setting the sleep time reduces power
consumption by turning off the fuser while the
machine is idle.
You can choose how long the machine must
be idle (from 000 to 240 minutes) before it
goes into sleep mode. When the machine
receives a fax, computer data, or makes a
copy, the timer will be reset. The default
setting is 005 minutes.
While the machine is in sleep mode the LCD
will display Sleep. When printing or copying
in sleep mode, there will be a short delay
while the fuser warms up.
a
Press Menu 1, 6, 2.
Ecology
2.Sleep Time
b
Enter the length of time the machine is
idle before entering sleep mode (000 to
240).
Press OK.
c
Press Stop/Exit.
LCD contrast
3
You can change the contrast to make the
LCD look lighter or darker.
a
Press Menu, 1, 8.
General Setup
8.LCD Contrast
b
Press a to make the LCD darker. Or,
press b to make the LCD lighter.
Press OK.
c
Press Stop/Exit.