Brother MFC-9450CDN - Manual (Page 81)

Remote fax options (black & white only)
65
9
Retrieving fax messages
9
a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers,
immediately enter your remote access
code (3 digits followed by l). If you hear
one long beep, you have messages.
c
When you hear two short beeps, use the
dial pad to press 9 6 2.
d
Wait for a long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent to (up to 20
digits), followed by # #.
e
Hang up after you hear your machine
beep. Your machine will call the other
machine, which will then print your fax
messages.
Note
You can insert a pause in a fax number by
using the # key.
Changing the fax forwarding
number
9
You can change the default setting of your fax
forwarding number from another telephone or
fax machine using touch tone.
a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers, enter
your remote access code (3 digits
followed by l). If you hear one long
beep, you have messages.
c
When you hear two short beeps, use the
dial pad to press 9 5 4.
d
Wait for a long beep, and then use the
dial pad to enter the new number of the
remote fax machine where you want
your fax messages forwarded (up to 20
digits), followed by # #.
e
Press 9 0 to reset the machine when
you have finished.
f
Hang up after you hear your machine
beep.
Note
You can insert a pause in a fax number by
using the # key.