Brother MFC 9840CDW - Manual (Page 36)

Installing the Driver & Software
34
STEP 2
Macintosh
®
Ma
c
in
tos
h
®
Wi
re
d
Netw
o
rk
5
For Wired Network Interface Users
For Mac OS
®
X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 4 through 11.
1
Connect the network interface cable to the
machine, and then connect it to your network.
Note
Make sure that the machine is turned on by
connecting the power cord.
2
Turn on your Macintosh
®
.
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please see the Network User’s Guide on the CD-
ROM to install the PS driver.
5
Choose Wired Network Connection
(Ethernet), and then click Next.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.