Brother MFC 9840CDW - Manual (Page 9)

Setting Up the Machine
7
4
Connect one end of the telephone line cord to
the jack on the machine marked LINE and the
other end to a modular wall jack.
Note
Make sure the telephone line cord is connected to
the jack labeled LINE and not the EXT. jack.
Warning
• The machine must be grounded using a 3-prong
plug.
• Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
Note
If you are sharing one phone line with an external
telephone answering device, connect it as shown
below.
Please set the receive mode to
External TAD.
For more details, see step 8 Choosing the
correct Receive Mode on page 9 and
Connecting an external TAD in Chapter 7 of
the User’s Guide.
6 Setting the date and time
The machine displays the date and time.
1
Press Menu.
2
Press 0.
3
Press 2.
4
Enter the last two digits of the year on the dial
pad, and then press OK.
02.Date&Time
Year:2008
Enter & OK Key
(e.g. Enter 0, 8 for 2008.)
5
Enter the two digits for the month on the dial
pad, and then press OK.
02.Date&Time
XX/XX/2008
Month:03
Enter & OK Key
(e.g. Enter 0, 3 for March.)