Brother DCP-350C - Manual (Page 30)

Chapter 2
16
Loading paper and
other media
2
Note
To print on Photo (4" ×6") or Photo L
(3.5" ×5") paper, you must use the photo
bypass tray. (See Loading photo
paper on page 19.)
a
If the paper support flap is open, close it,
and then pull the paper tray completely
out of the machine.
Lift the output paper tray cover (1).
b
Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
c
Fan the stack of paper well to avoid
paper jams and misfeeds.
Note
Always make sure that the paper is not
curled.
d
Gently put the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray.
1
1
2