Brother DCP-350C - Manual (Page 61)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
47
5
How to scan to a memory card
or USB Flash memory drive
5
You can scan black & white and color
documents into a memory card or USB Flash
memory drive. Black & white documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Color documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is 150dpi Color and the
default file format is PDF. File names default
to the current date that you set using the
control panel keys. (For details, see Quick
Setup Guide.) For example, the fifth image
scanned on June 1, 2007 would be named
06010705.PDF. You can change the color
and quality.
a
Insert a CompactFlash
®
, Memory
Stick
®
, Memory Stick Pro™,
SecureDigital™, MultiMediaCard™, xD-
Picture Card™ or USB Flash memory
drive into your machine.
WARNING
DO NOT take out the memory card while
PhotoCapture is blinking to avoid
damaging the card, USB Flash memory
drive, or data stored on the device that you
are using.
b
Load your document.
c
Press (Scan).
d
Press a or b to choose
Scan to Media
.
Press OK.
e
Do one of the following.
„ To change the quality, go to step f.
„ Press Black Start or Color Start to
start scanning without changing
additional settings.
f
Press a or b to choose 150dpi Color,
300dpi Color
, 600dpi Color,
200x100dpi B/W
or 200dpi B/W.
Press OK.
g
Do one of the following.
„ To change the file type, go to step h.
„ Press Black Start or Color Start to
start scanning without changing
additional settings.
h
Press a or b to choose JPEG, PDF or
TIFF
.
Press OK.
Note
• If you chose color in the resolution setting,
you cannot choose TIFF.
• If you chose black & white in the resolution
setting, you cannot choose JPEG.
i
Press Black Start or Color Start.
Quality Selectable File
Format
150dpi Color JPEG
/ PDF
300dpi Color JPEG
/ PDF
600dpi Color JPEG
/ PDF
200x100dpi B/W TIFF
/ PDF
200dpi B/W TIFF
/ PDF