ATO iSee 360i - Manual (Page 29)

Section 2. Setting Up Your iSee
iSee 360i User’s Manual - 23 -
Note: Shutting down the iSee does not shut off the iPod.
After shutting down the iSee, you can shut off the iPod
normally, by pressing and holding the iPod’s Play/Pause
button. Or the iPod switches off automatically after the
standard period of no user activity.
Emergency Shutdown and Reset
If the iSee appears unresponsive or seems to be operating
incorrectly, you can perform an emergency shutdown. This
resets the iSee and should allow recovery from any
malfunction.
To perform an emergency shutdown and reset:
1. Ensure the AC adapter is disconnected.
2. Press and hold iSee’s on/off button for 5 seconds. The iSee
will shut down.
3. Wait 30 seconds and press the on/off button to restart the
iSee.
4. If the iSee is still unresponsive, remove and reinsert the
battery.
Removing the iPod
To remove an iPod or an adapter:
1. Make sure power to the iSee is switched off and the AC
adapter is disconnected.
2. Look at the iPod’s screen to ensure it is blank or shows the
normal iPod menu. Do not remove the iPod if you see the
“Do not disconnect” screen.
3. If using an adapter, remove the iPod from the adapter first;
then go on to step 4 to remove the adapter from the iSee.