ATO iSee 360i - Manual (Page 65)

Section 7. Maintenance and Troubleshooting
iSee 360i User’s Manual - 59 -
Finding the Firmware Version
To find the firmware version of your iSee:
1. With the iSee main menu displayed, press and hold the
Menu ( ) button to go to the System Settings menu.
2. On the System Settings menu use the control panel scroll
buttons to place the selection highlight on User Guide . Then
press Select ( ). You see an iSee screen that shows the
firmware version number.
Updating iSee Firmware
The iSee firmware update works like this: Whenever your
computer is connected to the Internet, VidiScape automatically
checks for any iSee firmware revisions and downloads them to
your iPod. You can also check manually from VidiScape’s Help
menu.
To install the firmware update:
1. Make sure your computer is connected to the Internet so that
VidiScape can check for updates automatically.
-or-
On the computer, open VidiScape, and select
Help | Check
for Updates to manually check for updates.
2. Connect your iPod to the computer as you normally do and
follow the instructions to download the iSee firmware update
to the iPod.
3. In VidiScape, click File | Eject Device . Wait to see the iPod's
normal menu. (The "Do not disconnect" display will
disappear.)
4. Attach the AC adapter to the iSee and plug the AC adapter
into an electrical outlet.
Caution: When updating firmware, make sure the iSee is
operating from the AC adapter.
5. Insert your iPod into the iSee and turn on the iSee power.
The iSee is automatically updated to the new firmware.
When the iSee restarts, your new firmware is functional.