American Telecom AM64/128A - Manual (Page 16)

Status Menu AM64/128A User Manual
16
5.3.3 User Rate
This item displays the user rate in current use. A complete list is given in section 5.5 - Rate Menu.
For example: S > 48K 10
5.3.4 Line Rate
This has to be set locally to the BBM via the front panel and cannot be downloaded from the Master unit.
This displays the line rate in use:
If the high line rate (71.1kbps) is selected then the display is: S > 64K Rate
Note : This is the only rate available with G.703 Interface.
If double line rate (142.2kbps) is selected then the display is: S > 128K Rate
Note : Not available with G.703 Interface.
5.3.5 Interface Status
This item displays the state of the lines on the DTE interface. For X.21 the following messages are included:
(Note individual lines can be On or Off dependent on the interface)
S > C On I On S > C Off I Off
For X.21 bis the following messages are included :
Line 105 on Line 105 off
Line 106 on Line 106 off
Line 107 on Line 107 off
Line 108 on Line 108 off
Line 109 on Line 109 off
Line 140 on Line 140 off
Line 141 on Line 141 off
Line 142 on Line 142 off
There is also a X.21 bis composite display with the lines ON displayed as solid blocks.