Arcam Integrated Amplifier - Manual (Page 14)

14
Technical specifi cations
NOTE: All specification values are typical unless otherwise stated.
CONTINUAL IMPROVEMENT POLICY
Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.
A32 P35
Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8
Ω , 20Hz—20kHz 100W 100W
Single channel, 8 Ω , 20Hz—20kHz 150W 150W
Both channels, 4
Ω
, 20Hz—20kHz 140W 140W
Single channel, 4 Ω , at 1kHz 200W 200W
Three channels, 8 Ω , 20Hz—20kHz – 90W
Harmonic distortion, 80% power, 8 Ω at 1kHz 0.005% 0.005%
Inputs
Phono cartridge:
Input sensitivity 2.7mV (MM); 270µV (MC) –
Input impedance 47k
Ω
(MM); 300
Ω
(MC)
Signal/noise ratio (CCIR) –79dB (MM); –73dB (MC)
Overload margin 35dB –
Line and tape inputs:
Nominal
sensitivity 250mV—2V 800mV
Input impedance 22k
Ω
22k
Ω
Signal/noise ratio (CCIR) –103dB –110dB
Tone controls, max. boost/cut ±12dB @ 80Hz and 12kHz –
Power amplifi er input
Nominal sensitivity
800mV 800mV
Input impedance 22k Ω 22k Ω
Gain 31dB 31dB
Preamplifi er output
Nominal output level
700mV –
Maximum output level 8V RMS –
Output impedance <50
Ω
–
Headphone output
Maximum output level into 600
Ω 8V –
Output impedance 100 Ω –
General
Mains voltage
230V±12%; 115V±12% 230V±12%; 115V±12%
Power consumption (maximum) 800VA 800VA (950VA for P35/3)
Power consumption (standby) 2VA 2VA
Dimensions W x D x H (including feet) 430 x 370 x 110mm 430 x 350 x 110mm
Weight (net) 10.8kg 9.5kg (10.5kg for P35/3)
Weight (packed) 13kg 12.5kg (13.5kg for P35/3)
Supplied accessories mains lead mains lead
CR-389 remote control
2 x AAA batteries
E&OE