Arcam Integrated Amplifier - Manual (Page 3)

3
Using this handbook
This handbook has been designed to give you all the information you
need to install, connect, set up and use the Arcam A32 integrated
amplifier or the P35 power amplifier. The A32 amplifier is described
first, then the P35. The CR-389 remote control handset supplied with
the A32 integrated amplifier is also described.
Your amplifier(s) may have been installed and set up by an authorised
Arcam dealer. In this case, you may wish to go directly to the sections
describing the use of this equipment.
SAFETY
Safety guidelines are set out on the inside front cover of this
handbook.
Many of these items are common sense precautions, but for your own
safety, and to ensure that you do not damage the unit, we strongly
recommend that you read them.
CONTENTS
Using this handbook 3
Safety guidelines 4
Safety instructions 4
Safety compliance 4
Installation: A32 integrated amplifi er 5
Positioning the unit 5
Connecting to loudspeakers 5
Connecting to a power supply 6
Connecting to other equipment 6
Using your A32 integrated amplifi er 7
Front panel controls 7
Recording 8
Setting up your A32 integrated amplifi er 9
Using the remote control 10
Installation: P35 power amplifi er 11
Connecting to other equipment 11
Remote switching 11
Three channel option 11
Using your P35 power amplifi er 12
Bi-wiring and bi-amping loudspeakers 13
Before you start 13
Bi-wiring your loudspeakers 13
Bi-amping your system 13
Technical specifi cation 14
Service information 15
Guarantee 15
On-line registration 15
OTHER LANGUAGES
Check the Arcam website (www.arcam.co.uk) for further languages.