Main power and control panel power, How to turn on the main power, Main power and control panel power -7 – Canon ImageCLASS MF7480 User Manual
Page 48: How to turn on the main power ‑7
1‑7
Before Using the Machine
Main Power and Control Panel Power
The machine is provided with two power switches, a main power switch and a control
panel power switch.
How to Turn On the Main Power
This section explains how to turn on the main power.
1
Make sure that the power plug
is firmly inserted into the power
outlet.
Do not connect or disconnect the power cord
with wet hands, as this may result in electrical
shock.
2
Press the main power switch to “I”
side.
The main power indicator on the control
panel lights and the screen below is displayed
until the machine is ready to scan.
When the machine is ready to scan, the
screen below is displayed. The example
shown below is the Copy Basic Features
screen.
If the main power indicator does not light,
make sure that the power cord is firmly
inserted into the power outlet.
If the message <Enter the Department ID
and Password using the numeric keys.>
or <Enter the User ID and Password.>
appears on the touch panel display, enter
your registered ID and password. (See
“Department/User ID Management,” on
p. 1‑17.)
–
–