Canon EOS Rebel T5i 18-55mm IS STM Lens Kit - Manual (Page 27)

26
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing
JPEG/TIFF
Images
Index
Processing
Large Numbers
of Images
Reference
The brightness of an image can be adjusted. Move the slider to the right
to make the image brighter and to the left to make the image darker.
Adjusting Brightness
Reverts the image to
the original settings
Enter a numerical value
Drag the slider left or right
The adjustment range is –2.0 to +2.0 (in 0.01-stop increments when
entering a value).
If the image you shot is different to what you visualized, you can change
the Picture Style to get closer to what you envisaged.
Even if you have saved the image
(p.41) with [Monochrome] (p.30)
selected, you can still change to another Picture Style at any point by
simply selecting a Picture Style other than [Monochrome].
Changing a Picture Style
Reverts the image to
the original settings
Select
 Even if the RAW image is from a camera that does not have
Picture Style settings, you can still set a Picture Style as long as
the RAW image is compatible with DPP
(p.3) .
 You can retain the [Color tone], [Color saturation], [Contrast],
[Unsharp mask] and [Sharpness] settings, even if you change the
Picture Style
(p.93) .
 [Auto] is only applied to images shot with the EOS-1D X, EOS-1D
C, EOS 5D Mark III, EOS 6D, EOS REBEL T5i/700D, EOS
REBEL T4i/650D, EOS REBEL T3i/600D or EOS M.
When changing a Picture Style with several images selected, you
can select [Auto] if images shot with the EOS-1D X, EOS-1D C,
EOS 5D Mark III, EOS 6D, EOS REBEL T5i/700D, EOS REBEL
T4i/650D, EOS REBEL T3i/600D or EOS M are included. However,
[Auto] is actually applied only to images shot with the EOS-1D X,
EOS-1D C, EOS 5D Mark III, EOS 6D, EOS REBEL T5i/700D,
EOS REBEL T4i/650D, EOS REBEL T3i/600D or EOS M.
 You cannot select [Auto] with multiple-exposure RAW images
created on the camera.
COP
Y