Canon EOS Rebel T5i 18-55mm IS STM Lens Kit - Manual (Page 74)

73
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing
JPEG/TIFF
Images
Index
Processing
Large Numbers
of Images
Reference
 When the list box for selecting an extender is displayed, select
the extender attached at the time of shooting from the list box.
 Use the slider to adjust the Digital Lens Optimizer effect.
 When [MAX] is displayed for the Digital Lens Optimizer level, the
effect will remain the same even if you move the slider further to
the right.
 You can change the display position of the check window by
dragging the enlargement display position in the navigator
window.
 Even if you set shooting distance for a lens in this window, the
value indicated for shooting distance in the [Lens aberration
correction] window will not change.
 If no shooting distance information is saved to the image, the
shooting distance slider is set automatically to the right end at
infinity position and a [<!>] appears above the shooting distance
slider. The distance cannot be minutely adjusted by using the
slider for images shot with an EF-M lens. (The slider is not
displayed.)
 Images cannot be corrected for [Chromatic aberration] in [Lens
aberration correction] if the Digital Lens Optimizer has been
applied.
6 Click the [Save] button.
 The [Digital Lens Optimizer] window closes and correction
results are applied to the image in the edit window.
 Corrections made in the [Digital Lens Optimizer] window are also
displayed in the tool palette.
 In the main window, the [ ] mark is displayed on the image to
indicate that the Digital Lens Optimizer is applied (p.128) .
 After clicking the [Save] button, the application of the corrections
to the image may take some time.
 The size of the image file will be larger after applying the Digital
Lens Optimizer.
Performing Automatic Dust Erasure Processing
The Dust Delete Data that is appended to images shot with the camera
that can attach this data, can be used to automatically erase dust spots.
EOS-1D X EOS-1D C EOS-1D Mark IV
EOS-1Ds Mark III EOS-1D Mark III EOS 5D Mark III
EOS 5D Mark II EOS 6D EOS 7D
EOS 60D EOS 50D EOS 40D
EOS REBEL
T5i/700D EOS REBEL
T4i/650D EOS REBEL
T3i/600D
EOS REBEL
T2i/550D EOS REBEL
T1i/500D EOS DIGITAL REBEL
XSi/450D
EOS DIGITAL REBEL
XTi/400D DIGITAL EOS REBEL
T3/1100D EOS DIGITAL REBEL
XS/1000D
EOS M
_ _
1 In the main window, select an image appended with
Dust Delete Data.
2 Click the [Stamp] button.
 The copy stamp window appears.
Compatible Cameras
COP
Y