Canon VB-C60 - Manual (Page 89)

89
4
Register
Camera
Ser
ver
and
Set
Recor
ding
Sc
hedule
Add Storage Server
Edit Storage Server
In the Storage and Camera Server Summary, select the Storage Servers tab.
A list of Storage Servers which have already been added is displayed.
Double-click the Storage Server in
the list.
Alternatively, select the Storage
Server and click Edit.
This will bring up the Edit Storage
Server dialog.
Change the settings and click OK.
3
2
1
To save changes, click
Save Changes at the
bottom right-hand corner
of the Camera Summary
window.
Click Discard Changes to
cancel any changes you
have made.
4
Do not add the same Storage Server more than once.
If you add a Storage Server with a different configuration
(such as one managed by another Master Storage Server),
your original Locations and Zones will be invalid.
You need to change Windows settings of a storage server to
be added before if you are using Windows XP SP2 or Windows
Server 2003. Refer to “Notes on Operating Environment” (
➝ P.
24~27).
Do not change the port number.
Note
You should change the setting of Storage Server in case of the
IP address of Storage Server has been changed.
The Master Storage Server cannot be edited.
Note
COP
Y