Canon imageCLASS MF4880dw - Manual (Page 19)

19
Troubleshooting
19
Prepare for Wireless LAN Connection
1
Setting the Wireless LAN
2
Installing the Software
3
Troubleshooting
4
Check the settings of the wireless LAN router (access point).
If one of followings is the case:
“Setting by Manually Entering SSID” in the e-Manual
• The MAC address fi ltering is enabled.
• Stealth function * : Enabled
• Deny ANY ** : Enabled
• WEP key is set between <WEP Key 1> and <WEP key 4>, but the WEP key to use is not properly selected
in <Select WEP Key>.
• WEP key (hexadecimal): Automatically generated by the wireless LAN router or access point.
* A function that makes the wireless LAN router or access point invisible to the SSIDs on other devices.
** A function that makes the wireless LAN router or access point deny a connection when another device’s SSID is set to “Any” or
“Empty.”
If one of following is the case, change the settings of the wireless LAN router (access point).
• The MAC address fi ltering is enabled.
• An encryption method only when communicating using IEEE802.11n: WEP or TKIP
For the operation method of the wireless LAN router (access point), read the instruction manual for the wireless LAN
router or access point, or contact the manufacturer of the wireless LAN router or access point.