Canon imageCLASS MF4880dw - Manual (Page 7)

7
Setting the Wireless LAN
7



• Press [▲] or [▼] to highlight <SSID Settings>.
 Press [ ](Tone), and then highlight
<Entry Mode>.
Enter the network key using the numeric
keys.
Press [▲] or [▼] to highlight <Apply>.
• Press [▲] or [▼] to highlight the access point
you wrote down.
• If multiple matched SSIDs are displayed,
select the ID that is listed fi rst (the one with
the strongest signal).
If no SSID has been found:
““Checking SSID or Network Key for a
Wireless LAN Router/Access Point” (P.20)
• Press [▲] or [▼] to highlight <Select Access
Point>.
If “Cannot fi nd access point” is displayed:
“ “When an Error Message Appears” (P.14)
Select Access Point
SampleABCD WEP 13
SampleEFGHIJ WPA-PS
SampleKL WPA2-PSK 9
SampleMNOP None 7
Proceeding to
screen for entering
access point network
key.
Next Page
Wireless LAN Settings
WPS Push Button Mode
WPS PIN Code Mode
SSID Settings
Wireless LAN Informa ...
SSID Settings
Select Access Point
Manual Settings
WEP Key (5-26 Char.)
<Apply>
Entry Mode: A
Prepare for Wireless LAN Connection
1
Setting the Wireless LAN
2
Installing the Software
3
Troubleshooting
4
• Press [◀] to highlight <Yes>.
Do you want to
connect with new
settings?
No Yes