Cop y – Canon PowerShot ELPH 330 HS User Manual
Page 39
39
1
3
4
5
6
7
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover
Advanced Guide
2
Auto Mode/Hybrid
Auto Mode
-
Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution
settings (
47), the maximum zoom factor can be achieved by
following step 1.
•
Focal length when optical and digital zoom are combined is as follows (35mm
film equivalent).
24 – 960 mm (24 – 240 mm with optical zoom alone)
•
To deactivate digital zoom, press the <
n> button, choose [Digital Zoom]
on the [
4] tab, and then choose [Off].
Still Images
Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
1
Configure the setting.
z
z
Press the <
m> button, choose [ ]
in the menu, and then choose the [
]]
X
X
Once the setting is complete, [
]] is
displayed.
2
Shoot.
z
z
For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
z
z
For Movies: Press the movie button.
X
X
Once you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
X
X
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
z
z
To cancel shooting after you have
triggered the self-timer, press the
<
n> button.
z
z
To restore the original setting, choose
[ ] in step 1.
Still Images
Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
Configure the setting.
z
z
Follow step 1 in “Using the Self-Timer”
[].
X
X
Once the setting is complete, [
[] is
displayed.
z
z
Follow step 2 in “Using the Self-Timer”
COP
Y