Canon PowerShot ELPH 330 HS - Manual (Page 40)

40
1
3
4
5
6
7
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover
Advanced Guide
2 Auto Mode/Hybrid
Auto Mode
Still Images Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose [$].
z z Following step 1 in “Using the Self-Timer”
( = 39), choose [ $] and press the
< n> button.
2 Configure the setting.
z z Press the < o><p> buttons to choose
[Delay] or [Shots].
z z Press the < q><r> buttons to choose a
value, and then press the < m> button.
X X Once the setting is complete, [ $] is
displayed.
z z Follow step 2 in “Using the Self-Timer”
( = 39) to shoot.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
• When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the
flash fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will
remain lit in case the flash fires.)
Still Images
Deactivating the Flash
Prepare the camera for shooting without the flash as follows.
Configure the setting.
z z Press the < r> button, press the <q><r>
buttons to choose [ !], and then press
the < m> button.
X X Once the setting is complete, [ !] is
displayed.
z z To restore the original setting, repeat this
process but choose [ ].
• If a flashing [ ] icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take
other measures to keep it still.
COP
Y