Canon PowerShot ELPH 330 HS - Manual (Page 48)

48
1
3
4
5
6
7
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover
Advanced Guide
2 Auto Mode/Hybrid
Auto Mode
Still Images
Red-Eye Correction
Red-eye that occurs in the flash photography can be automatically
corrected as follows.
1 Access the [Flash Settings]
screen.
z z Press the < n> button, choose [Flash
Settings] on the [ 4] tab, and then press
the < m> button ( = 29).
2 Configure the setting.
z z Choose [Red-Eye Corr.], and then
choose [On] ( = 29).
X X Once the setting is complete, [ R] is
displayed.
z z To restore the original setting, repeat this
process but choose [Off].
• Red-eye correction may be applied to image areas other than eyes
(if the camera misinterprets red eye makeup as red pupils, for
example).
• You can also correct existing images ( = 103).
• You can also access the screen in step 2 by pressing the < r> button and then
the < n> button.
Still Images
Correcting Greenish Image Areas from
Mercury Lamps
In [ ] mode, subjects or background in shots of evening scenes
illuminated by mercury lamps may appear to have a greenish tinge. This
greenish tinge can be corrected automatically when shooting, using Multi-
area White Balance.
Configure the setting.
z z Press the < n> button, choose [Hg
Lamp Corr.] on the [ 4] tab, and then
choose [On] ( = 29).
X X Once the setting is complete, [ ] is
displayed.
z z To restore the original setting, repeat this
process but choose [Off].
• After you are finished shooting under mercury lamps, you should set
[Hg Lamp Corr.] back to [Off]. Otherwise, green hues not caused by
mercury lamps may be corrected by mistake.
• Try taking some test shots first to make sure you obtain the desired results.
COP
Y