Canon imagePROGRAF iPF760 - Manual (Page 470)

2
When using 24-inch or A1 (portrait) roll paper, pull out
the Adjustable Stopper (a). This completes the proce-
dure for switching to Extended position A.
Once the printing has finished, use the following procedure to return to the regular position.
1
Lower the Support Rod to the position shown (a) to re-
turn to the regular position. If the Adjustable Stopper (b)
is extended, retract it.
2
Return to the regular position.
• Switching to Extended position B
Switch the stacker to Extended position B as follows.
Using the Output Stacker iPF760
User's Guide
Handling Paper
Output Stacker
470