Canon imagePROGRAF iPF6400S - Manual (Page 343)

6
Click the OK button.
Return to the Layout screen.
Check that the Binding settings are applied in the pre-
view screen.
7
Configure the settings in the Printing Wizard dialog box.
Configuring Special Settings Configuring Special Settings
You can configure Special Settings from the imagePROGRAF Print Plug-In toolbar.
1
Click imagePROGRAF in the toolbar, and select Spe-
cial Settings.
2
Turn the checkbox for the item you want to change on or off.
Item Details
Show progress indicator during plug-in startup When this setting is off, hides the progress indicator that appears while the plug-
in is starting up.
Center sheets and print areas When this setting is off, printing is performed without changing the position.
When this setting is on, printing is performed with the top, bottom, left, and right
margins layed out equally. When this setting is off, printing is performed without
changing the position.
This function is only valid in Microsoft Excel.
Ensure image quality when creating page sizes When this setting is on, documents are created at the maximum size. This re-
duces the enlargement ratio during actual printing, which minimizes degradation
of the quality of photos, etc.
This function is only valid in Microsoft PowerPoint.
Correct the print area when analyzing For data that cannot be processed with usual data analysis, the print area is cor-
rected and then the data is processed. When data analysis fails, you may be able
to print by turning on this checkbox.
This function is only valid in Microsoft Excel.
3
Click OK to close the Special Settings dialog box.
iPF6400S Configuring Special Settings
User's Guide
Windows Software
Print Plug-In for Office
343