Canon imagePROGRAF iPF6400S - Manual (Page 611)

3
Load the custom paper into the printer and click the Ex-
ecute button in Create Calibration Target.
4
Once the calibration target is registered in the printer, click
the Next button in the Execute create calibration target
dialog box.
5
The Confirm Update dialog box is displayed.
Confirm the update and click the Execute button.
Note
• If creating the calibration target fails, Target not registered is displayed in Color Calibration in the Add and Edit
Custom Paper dialog box. If creating the calibration target fails, it might be able to be created by changing the
environment where the printer is located.
Warnings Warnings
Take note of the following warnings when added custom paper other than Canon genuine paper and feed confirmed
paper to the printer driver and the printer itself.
About the Cutter
• Depending on the paper, there are types that cannot be cut by the cutter unit, and types that speed deterioration
of the blade and cause damage to the cutter. For thick paper, hard paper, etc. do not use the cutter unit, and in-
stead cut the roll paper using scissors, etc. after printing. In this case, select User Cut as the Automatic Cutting
Settings in the Roll Paper Settings dialog box.
iPF6400S Warnings
User's Guide
Handling and Use of Paper
Media Configuration Tool (Mac OS)
611