Canon imagePROGRAF iPF8400 - Manual (Page 102)

Troubleshooting Troubleshooting
Problems Regarding Paper Problems Regarding Paper
Clearing Jammed Roll Paper .................................................................................................................................... 102
Clearing a Jammed Sheet ......................................................................................................................................... 105
Roll paper cannot be inserted into the paper feed slot .............................................................................. 108
Cannot load sheets ...................................................................................................................................................... 108
Paper is not cut straight ............................................................................................................................................ 108
Paper is not cut ............................................................................................................................................................. 109
The media take-up unit continues rotating ....................................................................................................... 109
The size of clear film cannot be detected ......................................................................................................... 110
Margins are wide ........................................................................................................................................................... 110
When printing on thin roll paper, the printed surface becomes scratched ........................................ 110
Clearing Jammed Roll Paper Clearing Jammed Roll Paper
If roll paper jams, follow the steps below to remove jams.
1
Turn the printer off. (See "Turning the Printer On and Off.") →User's Guide
2
Open the Top Cover.
Note
• If the leading edge of the roll jams in the carriage such as when the paper curls strongly, you may be able to
avoid paper jamming by setting the roll cutting method to Manual and setting the detection of paper leading
edge to [Off].
(See "Specifying the Cutting Method for Rolls.")
→User's Guide
3
If the Carriage is out, move the Carriage out of the
way, away from the paper.
Caution
• If you push the Carriage to the left edge, the blade of the Cutter Unit will be lowered in preparation to cut the
paper. Be careful not to pinch your fingers between the Carriage and Platen if you have pushed the Carriage
to the left edge or if a paper jam occurs during cutting.
Clearing Jammed Roll Paper iPF8400
Basic Guide
Troubleshooting
Problems Regarding Paper
102