Canon imagePROGRAF iPF8400 - Manual (Page 108)

7
If the Carriage is on the left, move the Carriage to
the right until it stops.
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you
turn on the printer.
8
Lower the Release Lever and close the Top Cover.
9
Turn the printer on. (See "Turning the Printer On and Off.") →User's Guide
Roll paper cannot be inserted into the paper feed slot Roll paper cannot be inserted into the paper feed slot
Cause Corrective Action
The roll paper is warped. Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot. Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
→P.102
(See "Clearing a Jammed Sheet.") →P.105
The paper source selection is incorrect. Press the Load button and select the paper source.
Cannot load sheets Cannot load sheets
Cause Corrective Action
The paper source selection is incorrect. Press the Load button and select the paper source.
Paper is not cut straight Paper is not cut straight
Cause Corrective Action
The paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.
Roll paper cannot be inserted into the paper feed slot iPF8400
Basic Guide
Troubleshooting
Problems Regarding Paper
108