Canon PowerShot S110 - Manual (Page 192)

192
Shooting Range and Focusing
2
Configure the setting.
z z Press the < n> button, and then
adjust the setting by pressing the
< q><r> buttons or turning the <7> dial.
• Focus bracketing is only available in [ !] mode (= 111).
• Continuous shooting ( = 179) is not available in this mode.
• You can also access the setting screen in step 2 by choosing [ ] in step 1
on = 182 and pressing the <n> button.
• Three shots are taken, regardless of any quantity specified in [ $] (= 108).
• In [Blink Detection] mode ( = 131), this function is only available for the final
shot.
• To access the screen in step 2, you can either touch [ ] on the screen in
step 1 or touch [ ] on the manual focus screen ( = 182).
• You can also configure this setting by touching or dragging the bar on the
screen in step 2 to specify a value and then touching [ ].
COP
Y