Canon PowerShot S110 - Manual (Page 197)

197
Flash
Still Images
Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
1
Access the setting screen.
z z Press the < n> button, choose [Flash
Settings] on the [ 4] tab, and then press
the < m> button (= 91).
2
Configure the setting.
z z Choose [Shutter Sync.], and then choose
the desired option ( = 91).
1st-curtain The flash fires immediately after
the shutter opens.
2nd-curtain The flash fires immediately before
the shutter closes.
COP
Y