Canon PowerShot S110 - Manual (Page 49)

49
Connecting to Web Services
2
Choose a Web service.
z z Press the < o><p><q><r> buttons or
turn the < 7> dial to choose the icon of
the destination Web service, and then
press the < m> button.
z z When you have selected email, choose
the recipient on the [Select Recipient]
screen and press the < m> button.
3
Connect to an access point.
z z Press the < o><p> buttons or turn the
< 7> dial to choose [Add an Access
Point], and then press the < m> button.
X X A list of detected access points will be
displayed in the [Access Point Connect]
screen.
X X For further instructions, see “Preparing
to Register a Computer” ( = 56) or
“Connecting to Access Points in the List”
(
= 67).
X X For instructions after connecting to an
access point, see “Adjusting Settings
for Using Web Services From CANON
iMAGE GATEWAY” ( = 46).
• You can also configure this setting through touch-screen operations
(
= 91).
• When a connection destination is set using the Touch Actions setting
(
= 248), you can automatically access the function to connect to the last
connected destination from the next time by just dragging on the screen
without needing to perform the connection operation.
COP
Y