Selecting the output level of the av, Terminal 130, Cop y – Canon XF105 User Manual
Page 130
Audio Output
130
Options
NOTES
• You can change the audio channel by setting an assignable button to [Audio Output CH] (0 97).
Selecting the Output Level of the AV Terminal
You can select the output level of audio that is output from the AV
terminal.
1 Open the audio ouput [Level] submenu.
[m Audio Setup]
[Audio Output]
[Level]
2 Select the desired level and then press SET.
Options
NOTES
• This setting does not affect audio output to headphones.
[CH1/CH2]:
Audio from CH1 is output from the left audio channel and audio from CH2 is output from the right audio
channel.
[CH1/CH1]:
Audio from CH1 is output from both the left and right audio channels.
[CH2/CH2]:
Audio from CH2 is output from both the left and right audio channels.
[All/All]:
Audio from CH1 and CH2 is mixed and output from both the left and right audio channels.
Operating modes:
[1 Vrms]:
The audio output level is normal.
[2 Vrms]:
The audio output level is 6 dB higher.
[m Audio Setup]
[Audio Output]
[Level]
[1 Vrms]
COP
Y