Canon XF105 - Manual (Page 36)

Preparing Recording Media
36
Checking the Status of the CF Card Slots
You can check the status of the CF card slots immediately by looking at the
CFj/CFl access indicator. Refer to the following table.
Removing a CF card
1 Wait until the access indicator for the card slot with the CF card to
be removed is off (
ቢ).
2 Slide the CF card slot cover switch in the direction of the
E/A mark ( ባ).
• The CF card slot cover will open to the left (slot A) or to the right
(slot B).
3 Push the CF card release button (
ቤ).
• The release button partially pops out.
4 Push in the CF card release button to release the CF card (
ብ).
5 Pull the CF card all the way out and close the CF card slot cover.
IMPORTANT
• Observe the following precautions while the CFj or CFl access
indicator is illuminated in red. Failure to do so may result in permanent
data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the cover of the CF card slot being accessed.
NOTES
• If you set the [J Other Functions] [Media Access LED] function to
[Off], the access indicators will not illuminate.
Access indicator color CF card slot status
Red Accessing CF card.
Green
Recording/playback is possible and the CF card slot is selected
for recording/playback.
Indicator off
A CF card is not inserted, the CF card slot is not currently
selected, or the CF card is not being accessed.
CF card release
button
COP
Y