Canon EOS-1D C - Manual (Page 318)

318
d Transferring Images to a Personal Computer
3
Set the camera’s power switch to
<1>.
When the personal computer prompts
you to select a program, select [EOS
Utility].
X The EOS Utility screen will appear on
the personal computer.
For RAW+JPEG images, you can specify
which image to transfer. On the next
page in step 2, select [RAW+JPEG
transfer], and select the images to be
transferred: [JPEG only], [RAW only], or
[RAW+JPEG].
3 Transferring RAW+JPEG Images
After the EOS Utility screen appears, do not operate EOS Utility. If any
screen other than EOS Utility’s top screen is displayed, [Direct transfer] in
step 5 on page 320 will not be displayed. (The image transfer function will
not be available.)
If the EOS Utility screen does not appear, refer to the Software
Instruction Manual (CD-ROM, p.412).
Before disconnecting the cable, turn off the camera. Hold the plug (not
the cord) to pull out the cable.
You can also transfer images to an ftp server via a wired LAN connected
to the Ethernet RJ-45 terminal (p.21). For details, refer to the separate
“Wired LAN Instruction Manual.”
The [RAW+JPEG transfer] setting will change automatically in relation with
the setting for [Communication settings]
→ [Network settings] → [Set
up] → [Transfer type/size] → [RAW+JPEG transfer].
COP
Y