Canon EOS-1D C - Manual (Page 72)

72
Although this is the same as Single-point AF, the
selected AF point <O> covers a smaller area to
focus. Effective for pinpoint focusing of
overlapping subjects such as an animal in a cage.
Since Spot AF covers a very small area, focusing
may be difficult during hand-held shooting or for a
moving subject.
Select one AF point <S> to be used for focusing.
The manually-selected AF point <S> and adjacent AF points <w>
(above, below, on the left and on the right) are used to focus. Effective
when it is difficult to track a moving subject with just one AF point.
With AI Servo AF, the manually-selected AF point <S> must focus-
track the subject first. However, it is easier to focus the target subject
than with Zone AF.
With One-Shot AF, when focus is achieved with an expanded AF point,
the expanded AF point <S> will also be displayed along with the
manually-selected AF point <S>.
AF Area Selection Modes
Single-point Spot AF (Manual selection)
Single-point AF (Manual selection)
AF point expansion (Manual selection ) COP
Y