Before operating, Stop/clear – Electrolux EI30BM55HS User Manual

Page 13

Advertising
background image

E

13

• Before operating your new oven make sure you

read and understand this Use and Care Guide
completely.

• Before the Over the Range Microwave Oven can

be used, follow these procedures:

1. Plug in the oven. Close the door. The oven display

will show

ENJOY YOUR OVEN TOUCH CLEAR

AND TOUCH CLOCK.

2. Touch the

STOP / CLE AR pad. :

will

appear.

3. Set clock. See below.

To Set the Clock

• Suppose you want to enter the correct time of

day 12:30 (A.M or P.M.).

Procedure

Step

Touch

1. Touch the

set clock pad.

set

clock

2. Enter the correct time

of day by touching the
numbers in sequence.

1

2

3

0

3. Touch the

set clock pad

again.

set

clock

This is a 12 hour clock. If you attempt to enter an
incorrect clock time,

ERROR will appear in the

display. Touch the

STOP/CLEAR pad and re-set

the clock.

• If the electrical power supply to your microwave

oven should be interrupted, the display will
intermittently show after the power is reinstated.
If this occurs during cooking, the program will
be erased. The time of day will also be erased.
Simply touch

STOP/CLEAR pad and reset the

clock for the correct time of day.

NOTE

Your Over the Range Microwave Oven can
be programmed with the door open except for
START add 30 sec, popcorn, fresh veggies,
frozen veggies, baked potato and sensor
reheat.

Stop/Clear

Touch the

STOP/CLEAR to:

1. Erase if you make a mistake during programming.

2. Cancel timer.

3. Stop the oven temporarily during cooking.

4. Return the time of day to the display.

5. Cancel a program during cooking, touch twice.

BEFORE OPERATING

ORM 2.0 Bottom [TINSEB310WRRZ] [13 13

ORM 2.0 Bottom [TINSEB310WRRZ] [13 13

10/19/10 1:21:38 PM

10/19/10 1:21:38 PM

Advertising