Electrolux EIDW1805KS - Manual (Page 2)

2
TOOLS YOU WILL NEED :
Phillips head screwdriver
5/16" and 1/4" nutdriver
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety Glasses
Flashlight
Bucket tocatch water when flushing
the line
Gloves
FOR NEW INSTALLATIONS
ONLY:
Tubing Cutter
Drill and Appropriate Bits
Hole Saw Set
Installation Preparation
PARTS SUPPLIED :
Two #8 Phillips flat head wood screws, 5/8" long
to secure dishwasher to underside of countertop
(in literature package).
Two Phillips head, color matched toekick screws
(in literature package).
MATERIALS YOU WILL NEED:
Ferrule, compression nut and 90° Elbow (3/8"
NPT external thread on one end, opposite end
sized to fit water supply)
Thread seal tape
UL Listed wire nuts (3)
MATERIALS FOR NEW INSTALLA-
TIONS ONLY:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connections
Hand shut-off valve
Water line 3/8" min. copper
Coupler for extending drain line, if applicable
90° Elbow,
Ferrule and
Compression
Nut
Wire Nuts (3)
Waste
Tee
Electrical Cable (or
Power Cord, if
applicable) Hot Water Line
Screw Type
Hose Clamps
Coupler
Hand Shut-
off Valve
2 Wood
Screws
Hole Saw
Set
Ruban à
mesurer
Tubing
Cutter
Safety Glasses
6"
Adjustable
Wrench
Bucket
Flashlight
Gloves
Level
Thread Seal
Tape
Air Gap
Strain
Relief
2 Color Matched
Toekick Screws
Drill and Bits
1/4" and 5/16"
Nutdriver
Phillips
Head
Screwdriver
Carpenters
Square
Screw Type
Hose Clamp