Electrolux EIDW1805KS - Manual (Page 7)

7
Installation Instructions
STEP 6 INSERT DRAIN HOSE
THROUGH CABINET
• Insert drain hose into cabinet wall hole. If a
power cord is used, guide the end through a
separate hole.
STEP 5 POSITION WATER LIND
AND HOUSE WIRING
• Position water supply line and house wiring on
the floor of the opening to avoid interference
with base of dishwasher and components under
dishwasher.
TIP: Position water line and house wiring on
the floor to avoid interference with base of
dishwasher.
STEP 7 SLIDE DISHWASHER PAR-
TIALLY INTO CABINET
DO NOT PUSH AGAINST FRONT PANEL WITH
KNEES. DAMAGE WILL OCCUR.
• Slide dishwasher into the opening a few inches
at a time.
• As you proceed, pull the drain hose through the
opening under the sink. Stop pushing when the
dishwasher is a few inches forward of adjacent
cabinetry.
• Make sure drain hose is not kinked under the
dishwasher and there is no interference with the
water line and wiring or any other component.