Fig. 10 fig. 11 – Electrolux EFP6440X User Manual
Page 44
44
relation to the depth of the wall cabinet by
acting on the two skirting boards F (Fig. 10).
In this way it will be possible to place the front
in line with the wall cabinet (Fig. 10).
a. Loosen the screws on the skirting board F;
b. Move the ledges backwards or forwards
depending on requirement.
c. Lock in the screws on the ledges.
Install a discharge tube on the connection ring C
supplied, preferably with a diameter equivalent
to the connection ring (Fig. 11). the discharge
tube should be sufficiently long to reach outside
(Suction version) or the ceiling of the wall
cabinet (Filter version).
Fix the connection ring C (snap into place), at
the upper exit of the cooker hood.
To ease the installation, the ring is equipped with
an index G that should correspond to the
appropriate guide H placed on the upper air
exit.
Complete the installation of the discharge tube.
Re-install the grease filters, connect the cooker
hood to the electrical mains and check the
perfect operation.
F
H
C
G
Fig. 10
Fig. 11