ATEN ALTUSEN KH1516 - Manual (Page 43)

Chapter 4. OSD Operation
29
(Continued from previous page.)
(Continues on next page.)
Setting Function
EDIT PORT
NAMES To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
Administrator to create, modify, or delete port names. To Edit a port
name:
1. Use the Navigation Keys to move the highlight bar to the port
you want, then press [Enter].
2. Key in the new Port Name, or modify/delete the old one. The
maximum number of characters allowed for the Port Name is
12. Legal characters include:
Š
All alpha characters: a - z; A - Z
Š
All numeric characters: 0 - 9
Š
+ - / . and Space
Case does not matter; the OSD displays the Port Name in all
capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc].
RESTORE
DEFAULT
VALUES This function is used to undo all changes and return the setup to
the original factory default settings (see OSD Factory Default
Settings, page 54) - except for the Names settings that were
assigned to the Ports, which are saved.
CLEAR THE
NAME LIST This function is similar to Restore Default Values. The difference is
that it also clears the Names settings along with undoing all
changes and returning the setup to the original factory default
settings.
ACTIVATE
BEEPER Choices are:
Y (ON), or
N (OFF).
When activated, the beeper sounds whenever a Port is changed;
when activating the Auto Scan function (see F7 SCAN, page 33);
or an invalid entry is made on an OSD menu. The default is Y.
kh15816-v1.book Page 29 Wednesday, October 25, 2006 11:05 AM