Performing the upgrade, Starting the upgrade – ATEN ALTUSEN KH1516 User Manual
Page 64
KH1508 / KH1516 User Manual
50
Performing the Upgrade
Starting the Upgrade:
To upgrade your firmware:
1. Run the downloaded Firmware Upgrade Package file - either by double
clicking the file icon, or by opening a command line and keying in the full
path to it.
The Firmware Upgrade Utility Welcome screen appears (see page 44).
2. Read and Agree to the License Agreement (enable the I Agree radio
button), then Click Next to continue. The Firmware Upgrade Utility main
screen appears:
The Utility inspects your installation. All the devices capable of being
upgraded by the package are listed in the Device List panel.
3. After all the devices have been listed, click Next to perform the upgrade.
If you enabled Check Firmware Version, the Utility compares the device's
firmware level with that of the upgrade files. If it finds that the device's
version is higher than the upgrade version, it brings up a dialog box
informing you of the situation and gives you the option to Continue or
Cancel.
If you didn't enable Check Firmware Version, the Utility installs the
upgrade files without checking whether they are a higher level, or not.
As the Upgrade proceeds status messages appear in the Status Messages
panel, and the progress toward completion is shown on the Progress bar.
kh15816-v1.book Page 50 Wednesday, October 25, 2006 11:05 AM