Sabbath mode, Switching on, Press and hold down the cool super button – Bosch B30BB830SS User Manual

Page 12: Press the vacation button, Switching off, Energy saving mode, Press the setup button, Eco” is displayed on the display panel, Door rail heater, Alarm function

Advertising
background image

en-us

12

Sabbath Mode

When Sabbath Mode is switched On, the following

settings are switched Off:

Ice Maker

Acoustic Signal

Interior Light

Messages in the Display Panel

The background illumination of the Display Panel is

reduced

Buttons are locked.

Switching On
1. Press and hold down the COOL SUPER Button.
2. Press the VACATION Button.
3. Press the COOL SUPER Button and hold down for

a further 3 seconds.
The “VACATION” symbol flashes on the Display

Panel and “SABBATH” is displayed.

Switching off

Press the VACATION Button.
The previous settings and temperature values are once

again activated.

Energy Saving Mode

If the Energy Saving Function (Eco Function) is

activated, the appliance switches to the Energy Saving

Operation. This Energy Saving Function is preset

at the factory in order to reduce energy consumption.

The background illumination of the Display Panel is

likewise reduced.
Switching On
1. Press the SETUP Button.
2. Press the Selection Button ¿, until “ECO MODE”

and the current setting (OFF) is displayed.

3. Press the Setting Button @, in order to reset

the setting.

4. Press the SETUP Button, in order to store the setting.

“ECO” is displayed on the Display Panel.

Switching Off
1. Press the SETUP Button.
2. Press the Selection Button ¿, until “ECO MODE”

and the current setting (ON) is displayed.

3. Press the Setting Button A, in order to reset

the setting.

4. Press the SETUP Button, in order to store the setting.

Door Rail Heater

To prevent condensation, the door rail heater can be

switched On and Off as required.
Switching On
1. Press the SETUP Button.
2. Press the Selection Button ¿, until “DRY DOOR“

and the current setting (OFF) is displayed.

3. Press the Setting Button @, in order to reset

the setting.

4. Press the SETUP Button, in order to store the setting.
Switching Off
1. Press the SETUP Button.
2. Press the Selection Button ¿, until “DRY DOOR“

and the current setting (ON) is displayed.

3. Press the Setting Button A, in order to reset

the setting.

4. Press the SETUP Button, in order to store the setting.

Alarm Function

Door Alarm

The Door Alarm switches On if an appliance door is left

open for longer than three minutes. Close the door

to switch Off the Warning Signal.

Temperature Alarm

The Temperature Alarm switches On if the Freezer

Compartment is too warm and the frozen food is at risk

of thawing.
The set temperature of the Freezer Compartment

flashes and “ALARM” is displayed on the display panel.
When the ALARM button is pressed, the temperature

display for the Freezer Compartment indicates for five

seconds the warmest temperature reached

in the Freezer Compartment.
Then this value is deleted. The temperature display for

the Freezer Compartment indicates the set Freezer

Compartment temperature without flashing.
Henceforth the “warmest temperature” will be redefined

and saved.
The alarm display goes out as soon as the set

temperature has been reached again.
The alarm may switch on without any risk

to the frozen food:

when the appliance is switched On,

when large quantities of fresh food are placed

in the appliance,

if the Freezer Compartment Door is open too long.

Switching Off the Alarm

Press the ALARM button to switch Off the Warning

Signal.

Advertising
This manual is related to the following products: