En-us 22 – Bosch B30BB830SS User Manual

Page 22

Advertising
background image

en-us

22

Fault

Possible cause

Remedial action

The Ice Maker does not make

enough ice or the ice is

deformed.

The appliance or Ice Maker has only

just been switched On.

Approximately 24 hours is needed until ice

production starts.

A lot of ice has been taken.

Approximately 24 hours is needed until

the Ice Cube Container is filled again.

Low water pressure.

Connect the appliance to the stipulated

water pressure only (see chapter

“Connecting Appliance”, section “Water

Connection”).

The Filter Cartridge is damaged

or used.

Exchanging the Filter Cartridge.

The Ice Maker does not make

any ice.

The Ice Maker is switched Off.

Switch the Ice Maker On at the control

panel.

The appliance is not supplied with

water.

Contact the installer or the Water Supply

company.

Water Supply has kinks.

Turn Off the Water Supply at the Shut Off

Tap. Smoothen out the kinks, exchange

where necessary.

Low Water Pressure.

Connect the appliance to the stipulated

water pressure only (see chapter

“Connecting Appliance”, section “Water

Connection”).

Temperature in the freezer space is

too warm.

Check Freezer Compartment temperature

and, if required, set slightly colder.

Ice Cube Container is not properly

inserted.

Check the position, re-insert where

necessary.

Incorrect Shut Off Tap installed.

Incorrect Shut Off Taps can cause low water

pressure and damage to the appliance.

Ice forms in the inflow hose

to the Ice Maker.

Low Water Pressure.

Connect the appliance to the stipulated

water pressure only (see chapter

“Connecting Appliance”, section “Water

Connection”).

Shut Off Tap incorrectly opened.

Open Shut Off Tap fully.

Temperature in the Freezer

Compartment is too warm.

Set temperature slightly colder

in the Freezer Compartment.

Water runs from the appliance. The Water Connection Hose is not

properly sealed.

Replace the hose with a manufacturer’s

original part.

Incorrect Shut Off Tap installed.

Incorrect taps can cause low water pressure

and damage to the appliance.

Advertising
This manual is related to the following products: