Bosch WAP24200UC - Manual (Page 16)

16
Getting to know your appliance
Control panel
Display field
+
  #
( Temp. selection, Spin Speed, Delay-Start
To change the default cycle settings.
Indicator lamp lights up if the setting is active.
0 Easy Iron, Extra Rinse, Prewash/Pre Treat
Additional option settings.
Indicator on = setting is active.
8 Start/Pause
▯
starts or pauses the selected cycle
▯
lit steady - cycle running, can be paused
▯
blinking - settings can be changed; cycle can
be started; door is locked (water may be hot);
cycle is in Pause mode
@ Cycle Selector for selecting a cycle and on/off
switch;
turns in both directions.
H Display field for settings and information.
( Selectable temperature ranges
Extra hot, Hot, Warm, Cold
0 Selectable spin speed ranges
High, Medium, Low, No spin
8 4 Digit Display:
▯
delay start-time
adjustable in 1h (hours) steps to 24 hours
▯
cycle duration
for example 2:40 (hours:minutes)
@ Cycle status sequence
H Child lock
P Indicator lamps for additional option settings
  # +
3