Installation instructions, 9 warning, 9 caution – Bosch WAP24200UC User Manual

Page 10: Washing machine is heavy, Introduction, Notices, Tools needed, Waste disposal, Warnings for children, To avoid risk of injury or death, do the following

Advertising
background image

10

Installation instructions

9

WARNING

RISK OF FIRE, ELECTIRICAL SHOCK OR INJURY

TO PERSONS
To reduce the risk of fire, electric shock or injury to

persons, read the Important Safety Instructions at

the front of this manual before installing or operating

this appliance.

9

CAUTION

WASHING MACHINE IS HEAVY
Use additional help and care when lifting and

positioning.

Introduction

Read these installation instructions completely and

carefully before starting to install your new washing

machine. The information contained can save you time

and effort and will help to ensure optimum performance

of your new washer. Be sure to observe all warnings and

cautions.
NOTICES

Frozen hoses can tear or burst. Do not install the

washing machine outdoors or in an area exposed to

freezing condtions.

If the washing machine is located in a room which will

be exposed to temperatures below freezing, or if it is

located in a cabin that is being shut down for the

winter, any residual water in the pump or water inlet

hose(s) must be drained.

Take care not to damage the washing machine. Do

not hold on to protruding parts (e.g. door) when lifting.

In addition to the safety information listed here, the

local water and electricity supplier may have special

requirements.

If in doubt, have the appliance connected by an

authorized technican.

These installation instructions are intended for use by

qualified installers. In addition to these instructions, the

installation must comply with:
- for the United States - National Electrical Code, ANSI/

NFPA70 - and latest editions of the State and municipal

and/or local regulations.
- for Canada - Canadian Electrical Code C22.1 - and the

latest editions of the Provincial, Municipal and/or local

regulations.

Tools needed

The following tools may be helpful during installation of

your washer.

13mm socket for removing the transport bolts.

17mm wrench for adjusting the appliance feet.

Bubble level for leveling the appliance.

Waste disposal

Disposal of Packaging Materials
After unpacking your new appliance dispose of the

protective packaging materials in an environmentally

friendly way. Ask your dealer or inquire with your local

authority regarding currently acceptable means of

disposal.

9

WARNING

WARNINGS FOR CHILDREN
Do not let children play with packaging and

associated parts to avoid risk of choking or

suffocation.

Disposal of Your Old Appliance
Your old appliance can be recycled if it is no longer to be

used. Prior to disposing of your old appliance observe

the following precautions to reduce safety risks.

9

WARNING

TO AVOID RISK OF INJURY OR DEATH, DO THE

FOLLOWING
- after unplugging the old appliance, remove the

electric power cord and dispose of properly.
- remove the door or permanently disable the door

lock to prevent children from being locked inside.

Advertising