Acer Aspire T160 - Manual (Page 52)

43 Chapter 2
PnP/PCI Configuration
Parameter Description Options
Init Display First Initialize the AGP video display
before initializing any other
display device on the system.
Thus the AGP display becomes
the primary display.
Reset Configuration Data Normally, you leave this field
Disabled. Select Enabled to
reset Extended System
Configuration Data (ESCD)
when you exit Setup if you have
installed a new add-on and the
system reconfiguration has
caused such a serious conflict
that the operating system
cannot boot. Enabled
Disabled
Resources Controlled By This item allows user to assign
PnP resource (I/O address,
IRQ&DMA channels) for Plug
and Play compatible devices
automatically or manually. Auto
Manual
Init Display First [PCIEx]
Reset Configuration Data [Disabled]
Resources Controlled By [Auto(ESCD0]
x IRQ Resources Press Enter
Pci/VGA Palette Snoop [Disabled]
** PCI Express relative items **
Maximum Payload Size [4096]
F5:Previous Values F7:Optimized Defaults
:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
Menu Level
Phoenix - Award BIOS CMOS Setup Utility
PNP/PCI Configurations
Item Help