Acer Aspire T160 - Manual (Page 98)

89 Chapter 5
IDE1 / IDE2 (IDE Connector)
An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE
cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to
connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave.
4: N/C
6: N/C
8: INDEXJ
10: MOTEAJ
12: DRVBJ
14: DRVAJ
16: MOTEBJ
18: DIRJ
20: SETPJ
22: WDATAJ
24: WGATEJ
26: TK00J
28: WPTJ
30: RDATAJ
32: SIDE1J
34: DSKCHGJ
Illustration Jumper / Header Name Pin No. and definition