1 creating a raid set – Asus P7F-M User Manual
Page 120
5-26
Chapter 5: RAID configuration
5.3.1
Creating a RAID set
To create a RAID set
1.
From the utility main menu, select
1. Create RAID Volume and press
<Enter>. The following screen appears.
2.
Enter a name for the RAID set and press <Enter>.
3.
When the
RAID Level item is selected, press the up/down arrow key to select
a RAID level to create, and then press <Enter>.
4.
When the
Disks item is selected, press <Enter> to select the hard disk drives
you want to include in the RAID set. The
SELECT DISKS screen appears.
5.
Use the up/down arrow key to select a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[
CREATE VOLUME MENU
]
[
HELP
]
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
Name:
Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Sync: N/A
Create Volume
[ SELECT DISKS ]
Port Drive Model Serial # Size Status
0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk
1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk
2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk
3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk
Select 2 to 6 disks to use in creating the volume.
[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done