2 chipset, Uncore configuration, Dram frequency [auto – Asus P7F-M User Manual

Page 76: 20 chapter 4: bios setup

Advertising
background image

4-20

Chapter 4: BIOS setup

v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.

BIOS SETUP UTILITY

Advanced

Advanced Chipset Settings

WARNING: Setting wrong values in below sections

may cause system to malfunction.

Uncore Configuration

←→

Select Screen

↑↓

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

4.4.2

Chipset

The Chipset configuration menu allows you to change advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.

Configure CPU Bridge

features.

Uncore Configuration

v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.

BIOS SETUP UTILITY

Advanced

CPU Bridge Chipset Configuration

CPU REVISION

:B0

Current CSI Frequency

:6.400GT

Current Memory Frequency

:1066 Mhz

CSI Links Speed

[Full-Speed]

CSI Frequency

[Auto]

Memory Frequency

[Auto]

Memory Mode

[Independent]

Demand Scrubbing

[Disabled]

Patrol Scrubbing

[Disabled]

Throttling - Closed Loop

[Disabled]

Throttling - Open Loop

[Disabled]

←→

Select Screen

↑↓

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

To transition the CSI

links to full-speed

or leave them in

slow-mode.

v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.

BIOS SETUP UTILITY

Advanced

Uncore Configuration

IMC : Lynnfield

Memory Remap Feature

[Enabled]

PCI MMIO Allocation: 4GB To 3072MB

DRAM Frequency

[Auto]

Configure DRAM Timing by SPD [Enabled]

DRAM Margin Ranks

[Disabled]

MRC Serial Debug Message Level [Disabled]

Memory ECC Function

[Enabled]

Double Rate Refresh

[Auto]

Page Policy

[Closed]

Adaptive Page

[Disabled]

Data Scramble

[Enabled]

Memory Thermal Throttling

[Disabled]

←→

Select Screen

↑↓

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

ENABLE: Allow

remapping of

overlapped PCI memory

above the total

physical memory.

DISABLE: Do not allow

remapping of memory.

Memory Remap Feature [Enabled]

Setting this item to [Enabled] allows you to remapp the overlapped PCI memory
above the total physical memory. Configuration options: [Disabled] [Enabled]

DRAM Frequency [Auto]

You may allow the system to detect DDR3 memory frequency via SPD or designate
a specific frequency.
Configuration options: [Auto] [800 MHz] [1066 MHz] [1333 MHz]

Refer to the memory AVL on ASUS website at www.asus.com.

Advertising