Mounting on a table, Caution, Warning – LG 50PH660S User Manual

Page 25

Advertising
background image

18

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a table

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from the

wall for proper ventilation.

2 Connect the power cord to a wall outlet.

CAUTION

y

Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

10 cm

10 cm

10 cm

10 cm

Securing the TV to a table

Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
(Only 42PH47**)

WARNING

y

To prevent TV from falling over, the TV

should be securely attached to the floor/

wall per installation instructions. Tipping,

shaking, or rocking the TV may cause injury.

Adjusting the angle of the TV to suit view

(This feature is not available for all models.)

Adjusting the angle of the TV to suit view

Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.

20

20

20

˚

20

˚

CAUTION

y

When adjusting the angle of the product, watch
out for your fingers.

- Personal injury may occur if hands or fingers

are pinched. If the product is tilted too much,

it may fall, causing damage or injury.

Securing the TV to a wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the
eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.

Advertising
This manual is related to the following products: