ARCHOS TV Plus 500973 User Manual

Page 65

Advertising
background image

MANUAL

V1.0

TV+

THE TV PROGRAM GUIDE > P. 65

Select the “

Test power Off code

” button. Make sure that your tuner is on. Your

ARCHOS device will then try to turn your tuner off. After a few seconds, your

ARCHOS will ask you if the device responded correctly:

If your tuner turned off, select “

Yes

”, and move on to the next section.

If your tuner did not turn off, select “

No, try next code

”. Your device will try turn-

ing the tuner off again, using a different code. Repeat this operation until the

ARCHOS manages to turn the tuner off.

If none of the codes work, check that the ARCHOS is positioned in a way that
allows the infrared signal to reach your tuner’s receiver. Note: In some rare
cases the ON/OFF functionality may not work.

2

nd

Test: changing channels on your tuner

After you select “

Yes

nCVVJGGPFQHVJG

st

test, the following screen appears. It allows

you to correctly set the parameters so that the ARCHOS can change channels on your

tuner (for a scheduled recording).

For the “

Channel

” parameter, select the highest channel that is currently memo-

rized on your tuner.
Select the “

Test channel select

” button. Make sure that your tuner is on. Your

ARCHOS device will then attempt to switch your tuner to the selected channel.

After a few seconds, your ARCHOS will ask you if the device responded correctly:

If this worked, select “

Yes

”.

If this did not work, select “

No, try next option

”. Your device will try again to

switch your tuner to the selected channel, using a different option*. Repeat this

operation until it successfully changes the channel on your TV receiver.

*Here is a description of the different parameters automatically set by the ARCHOS:

“Key Delay”:

delay between the emission of each digit of a channel (“

Short

”, “

Normal

”, “

Long

”).

“Key: Enter”:

Set to “

On

” if normally, you have to press an “

OK

” button on your turner’s remote control

CHVGT[QWGPVGTVJGEJCPPGNPWODGT'ZCORNG+H[QWPQTOCNN[RTGUUm

OK

nVQCEEGUUEJCPPGNVJGP

this parameter is set to “

On

”.

4.

9
:



2.

9
:

-

-

Advertising
This manual is related to the following products: